Back to the main page Back to the Tutorial Page  
Quickies Editing Vocal Tracks Cutting up long Tracks

Tutorial - III.Common Editing Tasks
Part 2 -  Editing Vocal Tracks  - Part 2

The Situation

You have:

   Vocals, Speech or Wallas (fx made with voices)

You want to:

  • remove inapropriate breathers, coughing, bad takes, parts you didn't like and bad noises
  • use only the good parts of takes
  • construct sequences from parts of different takes

You can combine three ways of handling this:

  1. Silence stuff you don't want.
  2. Substitute it with,
    • a piece of ambience to prevent a sudden hole in the sound texture
    • more fitting breather, that works better, if you're cutting a breather away.
  3. Use the envelope tool to create volume automation to pull down those parts, so they won't sound as loud in the end.

When do I use what ?

The first option is a tool, but is rarely used by itself.

In audio books, radio interviews and sometimes in dialog for a film, the vocal tracks will stand alone in many parts of your project.

Therefore the second option is general practice. Many times, the third option is used as well(envelope tool). The holes you create with it are easier to control and change at later times, but still need to be filled up with replacement material.

When using the envelope tool, replacement material is usualy overlayed by placing the filler material on another track right at the area in the timeline as the hole is. For this reason only silence unwanted audio if it's too obtrusive.

Bad takes are of course not usable, so usualy you'll have to cut that stuff away.

Just remember, that cut and delete(cut without copying to the clipboard) work like cutting tape away and sticking the remaining pieces together. If you're doing things that require critical timing, you need to keep this in mind. Use the Silence function instead.

Continuous sound is the key in those cases and having the ambience, even if it's just a bit of quiet dark noise, drop away in many parts by silencing them isn't going to sound as good as keeping a steady sound texture.

Therefore filling those holes with material on another track and fading the edges to make it all sound continuous is the preferred way to do it.

There are situations, such as vocals in a song, that you'd like to sound as clean as possible.

The best way is to have a very quiet recording room or location.

The second best way is to use volume automation to get rid of any unwanted stuff. It allows you to change or take back what you did after you have made those changes to the volume curve with the envelope tool.

With volume automation you can mute sections of the audio without actually making any edits to the audio data.

The Three Options - a quick How To

Silencing

Substitution

Using the Envelope Tool

Back to the main page Back to the Tutorial Page